Pulse-burst laser-based 10kHz Thomson scattering measurements

Thomson scattering(TS),as a popular and reliable diagnostic technique,has successfully measured electron temperatures and electron number densities of plasmas for many years.However,conventional TS techniques using Nd:YAG lasers operate only at tens of hertz.Here,we present the development of a high-repetition-rate TS instrument based on a high-speed,pulse-burst laser system to greatly increase the temporal resolution of measurements.Successful instrument prototype testing was carried out by collecting TS light from laboratory helium and argon plasmas at 10 kHz.Calibration of the instrument detection sensitivity using nitrogen/oxygen rotational Raman scattering signal is also presented.Quantitative electron number densities and electron temperatures of the plasma were acquired at 10 kHz,for stable plasma discharges as,respectively,～0.9 eV and ～5.37×10~(21)m~(-3) for the argon plasma,and ～1eV and ～6.5×1021 m~(-3) for the helium plasma.     

Improvement of quantitative analysis of molybdenum element using PLS-based approaches for laser-induced breakdown spectroscopy in various pressure environments

An experimental setup has been designed and realized in order to optimize the characteristics of laser-induced breakdown spectroscopy system working in various pressure environments. An approach combined the normalization methods with the partial least squares(PLS) method are developed for quantitative analysis of molybdenum(Mo) element in the multi-component alloy,which is the first wall material in the Experimental Advanced Superconducting Tokamak. In this study, the different spectral normalization methods(total spectral area normalization,background normalization, and reference line normalization) are investigated for reducing the uncertainty and improving the accuracy of spectral measurement. The results indicates that the approach of PLS based on inter-element interference is significantly better than the conventional PLS methods as well as the univariate linear methods in the various pressure for molybdenum element analysis.     

Diagnosis of the surface morphology of laser-ablated materials using the weighted- DCT approach in laser speckle interferometry for application to plasma facing materials

To implement on-line, real-time monitoring for the surface morphology of Plasma-Facing Materials (PFMs) in tokamak, we developed a Laser Speckle Interferometry measurement approach. A laser ablation method was used to simulate the erosion process during Plasma-Wall Interactions in a tokamak. In the present investigation, we evaluated the results of laser ablation morphology changes on the surface of Mo material reconstructed by four different approaches (Flood-fill, Quality-guided, Discrete Cosine Transform (DCT) and Weighted-DCT). The morphology results measured by the weighted-DCT approach are very close to the measurement results from confocal microscopy with an average error rate within 7%. It is verified that the weighted-DCT algorithm has high accuracy and can efficiently reduce the influence of noise pollution coming from laser ablation, which is used as a proxy for erosion from plasma wall interaction. Additionally, the CPU computer time has been shortened. This is of great significance for the real-time monitoring of PFMs’ morphology in the Experimental Advanced Superconducting Tokamak (EAST) in the future.     

激光立体成形TC4钛合金的热力场演化

激光立体成形能够实现高性能复杂零件的精确成形，但成形过程中的高温度梯度极易导致残余应力和变形，最终影响构件的几何精度和力学性能。通过搭建基板单边夹持原位热变形测量系统，探究了多道多层TC4钛合金成形件在激光立体成形过程中基板温度、变形的演化规律，分析了不同扫描策略对构件热应力场的影响。研究结果表明，构件的变形发展受其热历史驱使，扫描策略对成形件的热变形具有显著影响。     

表面织构形状对牙轮钻头轴承摩擦学性能影响的实验研究

牙轮钻头滑动轴承作为钻头破岩过程中传递载荷的关键部件,在低速重载的钻井过程中易发生黏着磨损失效。为改善牙轮钻头滑动轴承的耐磨性能,利用纳秒激光雕刻技术,在牙轮钻头滑动轴承轴颈表面加工了面积比为10%、深度为20μm的圆形、矩形、三角形及复合织构;基于赫兹相似理论,设计近似模拟钻头轴承工况的环-块配对副单元实验方案,并在UMT摩擦试验机上开展织构形状对钻头滑动轴承摩擦副摩擦因数、磨损量、温升变化和微观形貌影响规律的实验研究。结果表明:仿生织构的形状及布置方式对减摩和耐磨效果影响极大,其中圆形、矩形织构的减摩和耐磨性能最优,其次为三角形织构,而复合织构反而增大了摩擦因数及磨损量;单一织构对试件磨损量及温升的影响不大,而复合织构在增加摩擦的同时温度有明显升高,不利于井下高温环境下延长牙轮钻头寿命。     

老矿山残矿资源回收方案设计中三维探测及建模技术的应用

目前我国绝大多数中小型老矿山残矿回收面临一系列问题，包括资料缺失无法准确判定老采空区及剩余资源位置，无法准确掌握剩余资源形态及可回收量，回收方案设计与实际资源相差较大等。通过将三维探测及建模技术应用于老矿山残矿资源精准定位及回收方案设计中，有助于解决以上问题。以福建浦城屏峰硫铅锌矿为例，通过对老采空区采用三维激光扫描构建采空区三维模型，结合三维建模计算，构建了目前可回收的剩余资源三维模型。通过模型划分及切割，按照矿体实际形态，在三维模型中布设采切及穿孔工程，并将其导入平面施工图中，不仅可以减少设计工作量，而且能够精准匹配矿体，减少设计偏差。由于周边存在大量老采空区，为保障安全，在采空区及剩余资源精准三维模型的基础上，制定了采空区稳定性监测方案，布设了监测传感器，保障了资源回收安全。     

罗河铁矿采空区三维激光扫描及应用分析研究

针对传统采空区探测依靠全站仪测量存在劳动强度大、测量结果不准确等问题,采用BLSS-PE矿用三维激光扫描系统对罗河铁矿45-3^#和47-3^#采空区进行了现场扫描,构建了采空区三维实体模型,并在此基础上计算了采空区体积,说明了传统统计方式存在的不足;计算了矿房的超欠挖体积,为准确量化矿房损失率和贫化率提供了基础数据;基于采空区边界进行了二步骤回采设计,说明了采空区边界对于降低矿房损失贫化的重要意义。     

基于端面耦合的InP基激光器/硅光波导混合集成技术研究

针对硅光子集成回路缺少实用化光源的问题,提出了一种1.55μm波段InP基FP激光器芯片、InP基PIN光电探测器芯片与硅光波导芯片集成模块的设计与制备方法。使用CMOS工艺兼容的硅光无源器件制备工艺,设计并制备了倒拉锥型端面耦合器,与锥形透镜光纤耦合效率为36.7%。采用微组装对准技术将激光器芯片与硅波导芯片耦合、UV固化胶固化后耦合效率为35.8%,1 dB耦合对准容差横向为1.2μm,纵向为0.95μm。     

钛合金激光清洗及其对激光焊接气孔的影响

采用砂纸打磨、酸洗、激光清洗等方式对Ti6Al4V钛合金进行焊前清洗。通过扫描电镜、白光干涉仪、能谱仪分析了各种清洗方式下的表面形貌、粗糙度和化学成分，研究了不同清洗方式及参数对清洗效果的影响。在均匀熔透和表面质量良好的同一激光焊接条件下，比较了不同清洗条件对气孔率的影响。合适的激光清洗可有效清除焊接试件表面氧化层，并改善表面粗糙度，得到较低的气孔率，其焊缝可达到中国航天工业行业标准I级焊缝要求。